# Makefile.in generated by automake 1.16.5 from Makefile.am.
# doc/Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994-2021 Free Software Foundation, Inc.

# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.



# libEtPan! -- a mail stuff library
#
# Copyright (C) 2007 g10 Code GmbH
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
#    notice, this list of conditions and the following disclaimer in the
#    documentation and/or other materials provided with the distribution.
# 3. Neither the name of the libEtPan! project nor the names of its
#    contributors may be used to endorse or promote products derived
#    from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE
# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
# SUCH DAMAGE.

# libEtPan! -- a mail stuff library
#
# Copyright (C) 2007 g10 Code GmbH
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
#    notice, this list of conditions and the following disclaimer in the
#    documentation and/or other materials provided with the distribution.
# 3. Neither the name of the libEtPan! project nor the names of its
#    contributors may be used to endorse or promote products derived
#    from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHORS AND CONTRIBUTORS ``AS IS'' AND
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHORS OR CONTRIBUTORS BE LIABLE
# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
# SUCH DAMAGE.

# Description of the build system
# ===============================

# The build system uses automake and autoconf mostly in the usual way.
# A typical work flow for working with the SVN version would be:

# $ autoreconf
# $ ./configure --enable-maintainer-mode
# $ make

# All Makefile.am files must contain:

# include $(top_srcdir)/rules.mk

# If BUILT_SOURCES are desired, they need to be defined *after* the
# above include by a += directive, for example:

# BUILT_SOURCES += foo.h

# This is because rules.mk defines BUILT_SOURCES for its own purposes.

# Header Link Farm
# ================

# The public header files of libetpan are scattered throughout the
# source tree and defined by libetpaninclude_HEADERS automake variables.
# (The corresponding libetpanincludedir is defined in rules.mk).  Before
# building anything else in the project, we prepare a header link farm
# in include/libetpan (this directory will be created).  The header link
# farm is generated automatically when any Makefile (or other
# configure-generated file) is modified, for example by editing
# Makefile.am in maintainer mode.  This ensures that all modifications
# to libetpaninclude_HEADERS variables are picked up properly.

# The header link farm is built using the BUILT_SOURCES mechanism of
# automake, which means that it will only be built by "make all", "make
# check" and "make install".  This means that eithr of these commands
# needs to be used before targeting individual project files works.  If
# the header link farm should be generated or updated manually, the
# following command can be used in the *top-level build directory*:

# $ rm stamp-prepare; make stamp-prepare

am__is_gnu_make = { \
  if test -z '$(MAKELEVEL)'; then \
    false; \
  elif test -n '$(MAKE_HOST)'; then \
    true; \
  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
    true; \
  else \
    false; \
  fi; \
}
am__make_running_with_option = \
  case $${target_option-} in \
      ?) ;; \
      *) echo "am__make_running_with_option: internal error: invalid" \
              "target option '$${target_option-}' specified" >&2; \
         exit 1;; \
  esac; \
  has_opt=no; \
  sane_makeflags=$$MAKEFLAGS; \
  if $(am__is_gnu_make); then \
    sane_makeflags=$$MFLAGS; \
  else \
    case $$MAKEFLAGS in \
      *\\[\ \	]*) \
        bs=\\; \
        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
    esac; \
  fi; \
  skip_next=no; \
  strip_trailopt () \
  { \
    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  }; \
  for flg in $$sane_makeflags; do \
    test $$skip_next = yes && { skip_next=no; continue; }; \
    case $$flg in \
      *=*|--*) continue;; \
        -*I) strip_trailopt 'I'; skip_next=yes;; \
      -*I?*) strip_trailopt 'I';; \
        -*O) strip_trailopt 'O'; skip_next=yes;; \
      -*O?*) strip_trailopt 'O';; \
        -*l) strip_trailopt 'l'; skip_next=yes;; \
      -*l?*) strip_trailopt 'l';; \
      -[dEDm]) skip_next=yes;; \
      -[JT]) skip_next=yes;; \
    esac; \
    case $$flg in \
      *$$target_option*) has_opt=yes; break;; \
    esac; \
  done; \
  test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/libetpan
pkgincludedir = $(includedir)/libetpan
pkglibdir = $(libdir)/libetpan
pkglibexecdir = $(libexecdir)/libetpan
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = aarch64-rosa-linux-gnu
host_triplet = aarch64-rosa-linux-gnu
subdir = doc
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
	$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
AM_V_P = $(am__v_P_$(V))
am__v_P_ = $(am__v_P_$(AM_DEFAULT_VERBOSITY))
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_$(V))
am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
am__v_GEN_0 = @echo "  GEN     " $@;
am__v_GEN_1 = 
AM_V_at = $(am__v_at_$(V))
am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
am__v_at_0 = @
am__v_at_1 = 
SOURCES =
DIST_SOURCES =
am__can_run_installinfo = \
  case $$AM_UPDATE_INFO_DIR in \
    n|no|NO) false;; \
    *) (install-info --version) >/dev/null 2>&1;; \
  esac
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
am__DIST_COMMON = $(srcdir)/Makefile.in $(top_srcdir)/rules.mk
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = ${SHELL} '/builddir/build/BUILD/libetpan-5c9eb6b6ba64c4eb927d7a902317410181aacbba/missing' aclocal-1.16
AMTAR = $${TAR-tar}
AM_DEFAULT_VERBOSITY = 1
API_COMPATIBILITY = 20
API_CURRENT = 25
API_REVISION = 0
API_VERSION = 25:0:5
AR = ar
AS = as
AUTOCONF = ${SHELL} '/builddir/build/BUILD/libetpan-5c9eb6b6ba64c4eb927d7a902317410181aacbba/missing' autoconf
AUTOHEADER = ${SHELL} '/builddir/build/BUILD/libetpan-5c9eb6b6ba64c4eb927d7a902317410181aacbba/missing' autoheader
AUTOMAKE = ${SHELL} '/builddir/build/BUILD/libetpan-5c9eb6b6ba64c4eb927d7a902317410181aacbba/missing' automake-1.16
AWK = gawk
BUILD_FILEVERSION = 1,9,4,0
BUILD_REVISION = 0
BUILD_TIMESTAMP = 2023-12-31T17:39+0000
CC = /usr/bin/gcc
CCDEPMODE = depmode=none
CFLAGS = -O2 -fomit-frame-pointer -gdwarf-4 -Wstrict-aliasing=2 -pipe -Wformat -Werror=format-security -D_FORTIFY_SOURCE=2 -fPIC -fstack-protector-strong --param=ssp-buffer-size=4 -O2 -ffast-math -funroll-loops -gdwarf-4 -Wstrict-aliasing=2 -W -Wall
CPPFLAGS =  -D_REENTRANT 
CSCOPE = cscope
CTAGS = ctags
CXX = /usr/bin/g++
CXXCPP = /usr/bin/g++ -E
CXXDEPMODE = depmode=none
CXXFLAGS = -O2 -fomit-frame-pointer -gdwarf-4 -Wstrict-aliasing=2 -pipe -Wformat -Werror=format-security -D_FORTIFY_SOURCE=2 -fPIC -fstack-protector-strong --param=ssp-buffer-size=4
CYGPATH_W = echo
DBLIB = -ldb
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
DLLTOOL = false
DSYMUTIL = 
DUMPBIN = 
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = /usr/bin/grep -E
ETAGS = etags
EXEEXT = 
FGREP = /usr/bin/grep -F
FILECMD = file
GNUTLSLIB = -lgnutls -lgcrypt -lgpg-error -lz
GREP = /usr/bin/grep
INSTALL = $(SHELL) $(top_srcdir)/install-sh -c
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
LD = /usr/aarch64-rosa-linux-gnu/bin/ld
LDFLAGS = -O2 -fomit-frame-pointer -gdwarf-4 -Wstrict-aliasing=2 -pipe -Wformat -Werror=format-security -D_FORTIFY_SOURCE=2 -fPIC -fstack-protector-strong --param=ssp-buffer-size=4 -Wl,-O2  -Wl,--no-undefined   -s -lcurl -lexpat -lz
LIBICONV = 
LIBOBJS = 
LIBS = -lz 
LIBSUFFIX = 
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LIPO = 
LN_S = ln -s
LTLIBOBJS = 
LT_SYS_LIBRARY_PATH = 
MAINT = #
MAKEINFO = ${SHELL} '/builddir/build/BUILD/libetpan-5c9eb6b6ba64c4eb927d7a902317410181aacbba/missing' makeinfo
MANIFEST_TOOL = :
MKDIR_P = /usr/bin/mkdir -p
NM = /usr/bin/nm -B
NMEDIT = 
OBJDUMP = objdump
OBJEXT = o
OTOOL = 
OTOOL64 = 
PACKAGE = libetpan
PACKAGE_BUGREPORT = libetpan-devel@lists.sourceforge.net
PACKAGE_NAME = libetpan
PACKAGE_STRING = libetpan 1.9.4
PACKAGE_TARNAME = libetpan
PACKAGE_URL = 
PACKAGE_VERSION = 1.9.4
PATH_SEPARATOR = :
PKG_CONFIG = /usr/bin/pkg-config
PKG_CONFIG_LIBDIR = 
PKG_CONFIG_PATH = :/usr/lib64/pkgconfig:/usr/share/pkgconfig
RANLIB = ranlib
RC = 
REENTRANT = 1
SASLLIBS = -lsasl2 
SED = /usr/bin/sed
SET_MAKE = 
SHELL = /bin/sh
SSLLIBS = 
STRIP = strip
VERSION = 1.9.4
VERSION_MAJOR = 1
VERSION_MICRO = 4
VERSION_MINOR = 9
abs_builddir = /builddir/build/BUILD/libetpan-5c9eb6b6ba64c4eb927d7a902317410181aacbba/doc
abs_srcdir = /builddir/build/BUILD/libetpan-5c9eb6b6ba64c4eb927d7a902317410181aacbba/doc
abs_top_builddir = /builddir/build/BUILD/libetpan-5c9eb6b6ba64c4eb927d7a902317410181aacbba
abs_top_srcdir = /builddir/build/BUILD/libetpan-5c9eb6b6ba64c4eb927d7a902317410181aacbba
ac_ct_AR = ar
ac_ct_CC = /usr/bin/gcc
ac_ct_CXX = 
ac_ct_DUMPBIN = 
am__include = include
am__leading_dot = .
am__quote = 
am__tar = $${TAR-tar} chof - "$$tardir"
am__untar = $${TAR-tar} xf -
bindir = /usr/bin
build = aarch64-rosa-linux-gnu
build_alias = aarch64-rosa-linux-gnu
build_cpu = aarch64
build_os = linux-gnu
build_vendor = rosa
builddir = .
cfg_files =  /builddir/build/BUILD/libetpan-5c9eb6b6ba64c4eb927d7a902317410181aacbba/Makefile /builddir/build/BUILD/libetpan-5c9eb6b6ba64c4eb927d7a902317410181aacbba/build-windows/Makefile /builddir/build/BUILD/libetpan-5c9eb6b6ba64c4eb927d7a902317410181aacbba/include/Makefile /builddir/build/BUILD/libetpan-5c9eb6b6ba64c4eb927d7a902317410181aacbba/src/Makefile /builddir/build/BUILD/libetpan-5c9eb6b6ba64c4eb927d7a902317410181aacbba/src/bsd/Makefile /builddir/build/BUILD/libetpan-5c9eb6b6ba64c4eb927d7a902317410181aacbba/src/windows/Makefile /builddir/build/BUILD/libetpan-5c9eb6b6ba64c4eb927d7a902317410181aacbba/src/data-types/Makefile /builddir/build/BUILD/libetpan-5c9eb6b6ba64c4eb927d7a902317410181aacbba/src/low-level/Makefile /builddir/build/BUILD/libetpan-5c9eb6b6ba64c4eb927d7a902317410181aacbba/src/low-level/feed/Makefile /builddir/build/BUILD/libetpan-5c9eb6b6ba64c4eb927d7a902317410181aacbba/src/low-level/imap/Makefile /builddir/build/BUILD/libetpan-5c9eb6b6ba64c4eb927d7a902317410181aacbba/src/low-level/imf/Makefile /builddir/build/BUILD/libetpan-5c9eb6b6ba64c4eb927d7a902317410181aacbba/src/low-level/maildir/Makefile /builddir/build/BUILD/libetpan-5c9eb6b6ba64c4eb927d7a902317410181aacbba/src/low-level/mbox/Makefile /builddir/build/BUILD/libetpan-5c9eb6b6ba64c4eb927d7a902317410181aacbba/src/low-level/mh/Makefile /builddir/build/BUILD/libetpan-5c9eb6b6ba64c4eb927d7a902317410181aacbba/src/low-level/mime/Makefile /builddir/build/BUILD/libetpan-5c9eb6b6ba64c4eb927d7a902317410181aacbba/src/low-level/nntp/Makefile /builddir/build/BUILD/libetpan-5c9eb6b6ba64c4eb927d7a902317410181aacbba/src/low-level/pop3/Makefile /builddir/build/BUILD/libetpan-5c9eb6b6ba64c4eb927d7a902317410181aacbba/src/low-level/smtp/Makefile /builddir/build/BUILD/libetpan-5c9eb6b6ba64c4eb927d7a902317410181aacbba/src/driver/Makefile /builddir/build/BUILD/libetpan-5c9eb6b6ba64c4eb927d7a902317410181aacbba/src/driver/implementation/Makefile /builddir/build/BUILD/libetpan-5c9eb6b6ba64c4eb927d7a902317410181aacbba/src/driver/implementation/data-message/Makefile /builddir/build/BUILD/libetpan-5c9eb6b6ba64c4eb927d7a902317410181aacbba/src/driver/implementation/db/Makefile /builddir/build/BUILD/libetpan-5c9eb6b6ba64c4eb927d7a902317410181aacbba/src/driver/implementation/feed/Makefile /builddir/build/BUILD/libetpan-5c9eb6b6ba64c4eb927d7a902317410181aacbba/src/driver/implementation/hotmail/Makefile /builddir/build/BUILD/libetpan-5c9eb6b6ba64c4eb927d7a902317410181aacbba/src/driver/implementation/imap/Makefile /builddir/build/BUILD/libetpan-5c9eb6b6ba64c4eb927d7a902317410181aacbba/src/driver/implementation/maildir/Makefile /builddir/build/BUILD/libetpan-5c9eb6b6ba64c4eb927d7a902317410181aacbba/src/driver/implementation/mbox/Makefile /builddir/build/BUILD/libetpan-5c9eb6b6ba64c4eb927d7a902317410181aacbba/src/driver/implementation/mh/Makefile /builddir/build/BUILD/libetpan-5c9eb6b6ba64c4eb927d7a902317410181aacbba/src/driver/implementation/mime-message/Makefile /builddir/build/BUILD/libetpan-5c9eb6b6ba64c4eb927d7a902317410181aacbba/src/driver/implementation/nntp/Makefile /builddir/build/BUILD/libetpan-5c9eb6b6ba64c4eb927d7a902317410181aacbba/src/driver/implementation/pop3/Makefile /builddir/build/BUILD/libetpan-5c9eb6b6ba64c4eb927d7a902317410181aacbba/src/driver/interface/Makefile /builddir/build/BUILD/libetpan-5c9eb6b6ba64c4eb927d7a902317410181aacbba/src/driver/tools/Makefile /builddir/build/BUILD/libetpan-5c9eb6b6ba64c4eb927d7a902317410181aacbba/src/main/Makefile /builddir/build/BUILD/libetpan-5c9eb6b6ba64c4eb927d7a902317410181aacbba/src/main/libetpan_version.h /builddir/build/BUILD/libetpan-5c9eb6b6ba64c4eb927d7a902317410181aacbba/src/engine/Makefile /builddir/build/BUILD/libetpan-5c9eb6b6ba64c4eb927d7a902317410181aacbba/src/versioninfo.rc /builddir/build/BUILD/libetpan-5c9eb6b6ba64c4eb927d7a902317410181aacbba/doc/Makefile /builddir/build/BUILD/libetpan-5c9eb6b6ba64c4eb927d7a902317410181aacbba/tests/Makefile /builddir/build/BUILD/libetpan-5c9eb6b6ba64c4eb927d7a902317410181aacbba/libetpan.pc
datadir = /usr/share
datarootdir = ${prefix}/share
docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
dvidir = ${docdir}
exec_prefix = /usr
host = aarch64-rosa-linux-gnu
host_alias = 
host_cpu = aarch64
host_os = linux-gnu
host_vendor = rosa
htmldir = ${docdir}
includedir = /usr/include
infodir = /usr/share/info
install_sh = ${SHELL} /builddir/build/BUILD/libetpan-5c9eb6b6ba64c4eb927d7a902317410181aacbba/install-sh
libcurlconfig = /usr/bin/curl-config
libdir = /usr/lib64
libexecdir = /usr/libexec
localedir = ${datarootdir}/locale
localstatedir = /var
mandir = /usr/share/man
mkdir_p = $(MKDIR_P)
oldincludedir = /usr/include
pdfdir = ${docdir}
prefix = /usr
program_transform_name = s&^&&
psdir = ${docdir}
runstatedir = ${localstatedir}/run
sbindir = /usr/sbin
sharedstatedir = /var/lib
srcdir = .
sysconfdir = /etc
target_alias = aarch64-rosa-linux-gnu
top_build_prefix = ../
top_builddir = ..
top_srcdir = ..

# Public header files are defined by libetpaninclude_HEADERS variables.
etpanincludedir = $(includedir)/libetpan

# We add a recursive target "prepare" which creates the desired links
# in include/libetpan from libetpan include files scattered throughout
# the source.  See also README.rules.

# We hook into the BUILT_SOURCES mechanism of automake, see Section
# "Built sources" in the automake manual for details.
BUILT_SOURCES = $(top_builddir)/stamp-prepare
EXTRA_DIST = API.sgml depend.dot DOCUMENTATION layer.fig README.sgml

# DSL = /usr/lib/sgml/stylesheet/dsssl/docbook/nwalsh/html/docbook.dsl
DSL = /usr/share/sgml/docbook/stylesheet/dsssl/modular/html/docbook.dsl
JADE = jade
HTML_RENDER = lynx -force_html -nolist -dump

# FIXME: This needs more work.  CLEANFILES/DISTCLEANFILES need to be
# defined.  Maybe some documentation should be maintainer-generated
# and distributed.  The rules below could be more fine-grained.
SRC = API README
all: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) all-am

.SUFFIXES:
$(srcdir)/Makefile.in: # $(srcdir)/Makefile.am $(top_srcdir)/rules.mk $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --foreign doc/Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
	esac;
$(top_srcdir)/rules.mk $(am__empty):

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure: # $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): # $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs
tags TAGS:

ctags CTAGS:

cscope cscopelist:

distdir: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) distdir-am

distdir-am: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
check-am: all-am
check: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) check-am
all-am: Makefile
installdirs:
install: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) install-am
install-exec: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	if test -z '$(STRIP)'; then \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	      install; \
	else \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
	fi
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
	-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
clean: clean-am

clean-am: clean-generic clean-libtool mostlyclean-am

distclean: distclean-am
	-rm -f Makefile
distclean-am: clean-am distclean-generic

dvi: dvi-am

dvi-am:

html: html-am

html-am:

info: info-am

info-am:

install-data-am:

install-dvi: install-dvi-am

install-dvi-am:

install-exec-am:

install-html: install-html-am

install-html-am:

install-info: install-info-am

install-info-am:

install-man:

install-pdf: install-pdf-am

install-pdf-am:

install-ps: install-ps-am

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am:

.MAKE: all check install install-am install-exec install-strip

.PHONY: all all-am check check-am clean clean-generic clean-libtool \
	cscopelist-am ctags-am distclean distclean-generic \
	distclean-libtool distdir dvi dvi-am html html-am info info-am \
	install install-am install-data install-data-am install-dvi \
	install-dvi-am install-exec install-exec-am install-html \
	install-html-am install-info install-info-am install-man \
	install-pdf install-pdf-am install-ps install-ps-am \
	install-strip installcheck installcheck-am installdirs \
	maintainer-clean maintainer-clean-generic mostlyclean \
	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
	tags-am uninstall uninstall-am

.PRECIOUS: Makefile


# The stamp file depends on all files generated by configure.  This
# naturally includes all Makefiles which define
# libetpaninclude_HEADERS variables for public header files, which are
# the files we want.  There are some more files in this list, but we
# don't mind regenerating the header link farm a bit more often than
# necessary.  Usually you won't notice a difference as
# configure-generated files are updated very rarely.
$(top_builddir)/stamp-prepare: $(cfg_files)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) stamp-prepare-target
	touch $(top_builddir)/stamp-prepare

# This target should only be invoked in the top level directory (ie
# indirectly through $(top_builddir)/stamp-prepare).  It is
# responsible for updating the header link farm.  First, the header
# link farm is deleted by invoking the clean target in the include
# directory.  Then the header link farm is (re-)generated by
# exploiting the recursive targets mechanism provided by automake.
# Note that this is exploiting automake internals (automake currently
# provides no official hooks for recursive targets).
stamp-prepare-target: $(cfg_files)
	cd include && $(MAKE) $(AM_MAKEFLAGS) clean
	$(MAKE) $(AM_MAKEFLAGS) RECURSIVE_TARGETS=prepare-recursive prepare
	touch stamp-prepare

# Leaf directories (without SUBDIRS) do not have a target
# $(RECURSIVE_TARGETS), so we need to terminate prepare-recursive for
# them here.
prepare-recursive:

# The standard prepare target first recurses, and then calls the
# individual rules.
prepare: prepare-recursive prepare-am

# The local prepare rules are first rules internal to this file
# rules.mk, and second rules local to a single Makefile.am file.  The
# internal rules here create symbolic links for each installed public
# header file of libetpan under $(top_builddir)/include/libetpan/.
prepare-am: prepare-local
	@if test "$(etpaninclude_HEADERS)" != ""; then \
          echo "$(mkinstalldirs) $(top_builddir)/include/libetpan/"; \
          $(mkinstalldirs) $(top_builddir)/include/libetpan/;\
          echo "cd $(top_builddir)/include/libetpan/"; \
          cd $(top_builddir)/include/libetpan/ \
          && for hdr in $(etpaninclude_HEADERS) list_end; do \
           if test $${hdr} != list_end; then \
             if test -e $(abs_srcdir)/$${hdr}; then \
                   echo "$(LN_S) -f $(abs_srcdir)/$${hdr} ."; \
                   $(LN_S) -f $(abs_srcdir)/$${hdr} .; \
             else \
                   echo "$(LN_S) -f $(abs_builddir)/$${hdr} ."; \
                   $(LN_S) -f $(abs_builddir)/$${hdr} .; \
             fi; \
           fi; \
          done; \
        fi

# Use this target to extend the prepare rules in a single Makefile.am.
prepare-local:

#  Copyright 2007 g10 Code GmbH

#  This file is free software; as a special exception the author gives
#  unlimited permission to copy and/or distribute it, with or without
#  modifications, as long as this notice is preserved.

#  This file is distributed in the hope that it will be useful, but
#  WITHOUT ANY WARRANTY, to the extent permitted by law; without even the
#  implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

doc:
	@for i in $(SRC); do \
		echo $$i - building html; \
		$(JADE) -t sgml -V nochunks -d $(DSL) $$i.sgml > $$i.html; \
		\
		echo $$i - building txt; \
		$(HTML_RENDER) $$i.html > $$i.txt; \
		\
		echo $$i - building multipage HTML; \
		mkdir -p $$i; \
		cd $$i; \
		$(JADE) -t sgml -d $(DSL) ../$$i.sgml; \
		cd ..; \
	done

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
