tilt.cpp File Reference

#include <qimage.h>
#include <qstring.h>
#include <qapplication.h>
#include <math.h>
#include "tilt.h"
#include "tilt_internal.h"
#include "../../gui/statusWidget.h"

Include dependency graph for tilt.cpp:

Go to the source code of this file.

Macros
#define	MIN(x, y)
#define	MAX(x, y)

Functions
QImage *	correctImageTilt (QString filename, QPoint p1, QPoint p2, StatusWidget *status)
QRgb	interpolatedPixelValue (double xp, double yp, QImage *image)
QRgb	blendColors (QRgb color1, QRgb color2, double alpha)
DPoint	findTwoLineIntersection (DPoint p1, DPoint p2, DPoint p3, DPoint p4)

Macro Definition Documentation

MAX

#define MAX	(		x,
			y )

Value:

((x) < (y) ? (x) : (y))

Definition at line 18 of file tilt.cpp.

Referenced by blendColors(), and correctImageTilt().

MIN

#define MIN	(		x,
			y )

Value:

((x) < (y) ? (x) : (y))

Definition at line 17 of file tilt.cpp.

Referenced by blendColors(), and correctImageTilt().

Function Documentation

blendColors()

QRgb blendColors	(	QRgb	color1,
		QRgb	color2,
		double	alpha )

Definition at line 362 of file tilt.cpp.

{
  double alpha2 = 1.0-alpha;
  return qRgb( (int) MAX( MIN( 255, alpha2*qRed  (Qt::color1) + alpha*qRed(color2)   ), 0 ),
               (int) MAX( MIN( 255, alpha2*qGreen(Qt::color1) + alpha*qGreen(color2) ), 0 ),
               (int) MAX( MIN( 255, alpha2*qBlue (Qt::color1) + alpha*qBlue(color2)  ), 0 ) );
}

References MAX, and MIN.

Referenced by interpolatedPixelValue().

correctImageTilt()

QImage * correctImageTilt	(	QString	filename,
		QPoint	p1,
		QPoint	p2,
		StatusWidget *	status )

Definition at line 103 of file tilt.cpp.

{
  //first compute distance between two points or "radius"
  int dx = p2.x() - p1.x();
  int dy = p2.y() - p1.y();
  
  //determine tilt angle
  int delta = 0;
  
  //compute recirpocal of distance between points
  double recip_r = 1.0 / sqrt( (double) (dx*dx + dy*dy) );
  
  //compute angle with horizontal axis
  if( QABS(dx) > QABS(dy) )
  {
    delta = dy;
    if(dx > 0) delta = -delta;
  }
  //compute angle with vertical axis
  else
  {
    delta = dx;
    if(dy < 0) delta = -delta;
  }
  
  double sinTheta = (delta * recip_r);
  double theta = asin( sinTheta );
  double cosTheta = cos( theta );
  
  //if angle is 0 (improbable but possible) then quit now
  if( theta == 0 )
    return NULL;
  
  //load original and edited images
  QImage originalImage( filename );
  
  //convert to 32-bit depth if necessary
  if( originalImage.depth() < 32 ) { originalImage = originalImage.convertDepth( 32, Qt::AutoColor ); }
  
  QImage rotatedImage( originalImage.width(), originalImage.height(), originalImage.depth() );
  
  //setup progress bar
  QString statusMessage = qApp->translate( "correctImageTilt", "Correcting Tilt:" );
  status->showProgressBar( statusMessage, 200 );
  qApp->processEvents();  
  
  //during the first phase update the status bar for every 1% of image pixels that are processed
  int updateIncrement = (int) ( 0.01 * originalImage.width() * originalImage.height() );
  int newProgress = 0;
  
  //set each pixel to the rotated value
  double xp, yp;
  
  double w2 = 0.5 * rotatedImage.width();
  double h2 = 0.5 * rotatedImage.height();
  
  int x,y;
  uchar* scanLine;
  QRgb* rgb;
  for( y=0; y<rotatedImage.height(); y++)
  {   
    //iterate over each selected pixel in scanline
    scanLine = rotatedImage.scanLine(y);
    for( x=0; x<rotatedImage.width(); x++)
    {
      //compute unrotated coordinates
      xp = cosTheta*(x-w2) + sinTheta*(y-h2) + w2;
      yp = -sinTheta*(x-w2) + cosTheta*(y-h2) + h2;
 
      //set unrotated value
      rgb = ((QRgb*)scanLine+x);
      *rgb = interpolatedPixelValue( xp, yp, &originalImage);
 
      //update status bar if significant progress has been made since last update
      newProgress++;
      if(newProgress >= updateIncrement)
      {
        newProgress = 0;
        status->incrementProgress();
        qApp->processEvents();  
      }
      
    }
  }
  
  //find rotated corners
  double nTheta = -theta;
  double sinNTheta = sin( nTheta );
  double cosNTheta = cos( nTheta );
  
  DPoint topLeft = DPoint( cosNTheta*(-w2) + sinNTheta*(-h2) + w2,
                           -sinNTheta*(-w2) + cosNTheta*(-h2) + h2 );
 
  DPoint topRight = DPoint( cosNTheta*(w2) + sinNTheta*(-h2) + w2,                           
                            -sinNTheta*(w2) + cosNTheta*(-h2) + h2 );
  
  DPoint bottomLeft = DPoint( cosNTheta*(-w2) + sinNTheta*(h2) + w2,                           
                              -sinNTheta*(-w2) + cosNTheta*(h2) + h2 );
  
  DPoint bottomRight = DPoint( cosNTheta*(w2) + sinNTheta*(h2) + w2,                           
                               -sinNTheta*(w2) + cosNTheta*(h2) + h2 );
  
  //determine which of these points are which in their rotated form
  DPoint top, bottom, left, right;
  if( theta < 0 )
  {
    top = topRight;
    bottom = bottomLeft;
    left = topLeft;
    right = bottomRight;
  }
  else
  {
    top = topLeft;
    bottom = bottomRight;    
    left = bottomLeft;
    right = topRight;
  }
  
  //construct true corners
  DPoint trueTopLeft    ( 0, 0 );
  DPoint trueTopRight   ( rotatedImage.width()-1, 0 );
  DPoint trueBottomLeft ( 0, rotatedImage.height()-1 );
  DPoint trueBottomRight( rotatedImage.width()-1, rotatedImage.height()-1 );
  
  //find intersections with image boundary
  DPoint topEdgeL = findTwoLineIntersection( left, top, trueTopLeft, trueTopRight );
  DPoint topEdgeR = findTwoLineIntersection( top, right, trueTopLeft, trueTopRight );
                                            
  DPoint bottomEdgeL = findTwoLineIntersection( left, bottom, trueBottomLeft, trueBottomRight );
  DPoint bottomEdgeR = findTwoLineIntersection( bottom, right, trueBottomLeft, trueBottomRight );
 
  DPoint leftEdgeT = findTwoLineIntersection( left, top, trueTopLeft, trueBottomLeft );
  DPoint leftEdgeB = findTwoLineIntersection( left, bottom, trueTopLeft, trueBottomLeft );
    
  DPoint rightEdgeT = findTwoLineIntersection( right, top, trueTopRight, trueBottomRight );
  DPoint rightEdgeB = findTwoLineIntersection( right, bottom, trueTopRight, trueBottomRight );
  
  //shot rays out from image center to each true corner and find intersections with clipped corners
  DPoint center( (int)w2, (int)h2 );
  DPoint safeTopLeft     = findTwoLineIntersection( center, trueTopLeft, leftEdgeT, topEdgeL );
  DPoint safeTopRight    = findTwoLineIntersection( center, trueTopRight, rightEdgeT, topEdgeR );
  DPoint safeBottomLeft  = findTwoLineIntersection( center, trueBottomLeft, leftEdgeB, bottomEdgeL );
  DPoint safeBottomRight = findTwoLineIntersection( center, trueBottomRight, rightEdgeB, bottomEdgeR );
  
  //find constrained area
  double minY = MAX( safeTopLeft.y(), safeTopRight.y() );
  double maxY = MIN( safeBottomLeft.y(), safeBottomRight.y() );
  
  double minX = MAX( safeTopLeft.x(), safeBottomLeft.x() );
  double maxX = MIN( safeTopRight.x(), safeBottomRight.x() );
 
  //find contrained area in integer coordinates. this is semi-tricky.
  //if the minimum values decimal porition is nonzero then increment by one 
  // (eg 5.37 -> 6)
  int xMin = (int) minX;
  int xMax = (int) maxX;
  
  int yMin = (int) minY;
  int yMax = (int) maxY;
  
  if( xMin < minX ) xMin++;
  if( yMin < minY ) yMin++;
  
  //construct cropped rotated image
  QImage* editedImage = new QImage( xMax - xMin + 1,
                                    yMax - yMin + 1,
                                    rotatedImage.depth() );    
 
  //during the second phase update the status bar for every 1% of cropped pixels that are procesed
  updateIncrement = (int) ( 0.01 * editedImage->width() * editedImage->height() );
  newProgress = 0;
  
  int x2,y2;
  uchar* scanLine2;
  QRgb* rgb2;
 
  y2 = 0;
  for( y=yMin; y<=yMax; y++, y2++)
  {   
    //iterate over each selected pixel in scanline
    scanLine = rotatedImage.scanLine(y);
    scanLine2 = editedImage->scanLine(y2);
 
    x2 = 0;
    for( x=xMin; x<=xMax; x++, x2++)
    {
      rgb  = ((QRgb*)scanLine +x );
      rgb2 = ((QRgb*)scanLine2+x2);
      *rgb2 = *rgb;      
 
      //update status bar if significant progress has been made since last update
      newProgress++;
      if(newProgress >= updateIncrement)
      {
        newProgress = 0;
        status->incrementProgress();
        qApp->processEvents();  
      }
    
    }
  }
  
  //remove status bar
  status->setStatus( "" );
  qApp->processEvents();  
  
  //return pointer to edited image
  return editedImage;
}

References bottomRight, editedImage, findTwoLineIntersection(), StatusWidget::incrementProgress(), interpolatedPixelValue(), MAX, MIN, newProgress, StatusWidget::setStatus(), StatusWidget::showProgressBar(), status, topLeft, updateIncrement, DPoint::x(), and DPoint::y().

Referenced by EditingInterface::finishCorrectTilt().

findTwoLineIntersection()

DPoint findTwoLineIntersection	(	DPoint	p1,
		DPoint	p2,
		DPoint	p3,
		DPoint	p4 )

Definition at line 370 of file tilt.cpp.

{
  //----------------------------------------------
  //=== Case 1: neither line has a change in X ===
  //----------------------------------------------
  //If there is no change in x for both lines, 
  //either lines will NEVER or ALWAYS intersect.
  if(p1.x() == p2.x() &&
     p4.x() == p3.x())
  {
    //Ok, if their x values are equal, return 
    //intersection point as line A's point A.
    //Yes, this is a little arbitratry. But 
    //theoreticaly this section of code will almost
    //never be executed.
    if( p1.x() == p3.x() )
    { return DPoint( p1.x(), p1.y() ); }
    //Else lines will never intersect,
    //return pair (-32000,-32000)
    else
    { return DPoint( -32000, -32000 ); }
  } 
  //----------------------------------------------
  //Else, we know at least one of the lines 
  //does NOT have a slope of infinity!!!
  //----------------------------------------------
  
  //----------------------------------------------
  //=== Case 2: line A has no change in X      ===
  //----------------------------------------------
  //If line A has an infinite slope (no change in x)
  //we know line B does not have an infinite slope...
  else if( p1.x() == p2.x() )
  {
    double slopeB = ((double) (p4.y() - p3.y()) ) / (p4.x() - p3.x());
    
    double yInterceptB = p3.y() - slopeB*p3.x();
    
    //y = mx+b
    return DPoint( p2.x(), slopeB*p2.x() + yInterceptB );
  }
  //----------------------------------------------
  //=== Case 3: line B has no change in X      ===
  //----------------------------------------------
  //If line B has an infinite slope (no change in x)
  //we know line A does not have an infinite slope...
  else if( p4.x() == p3.x() )
  {
    double slopeA = ((double) (p2.y() - p1.y()) ) / (p2.x() - p1.x());
    
    double yInterceptA = p1.y() - slopeA*p1.x();
    
    //y = mx+b
    return DPoint( p4.x(), slopeA*p4.x() + yInterceptA );
  }
  //----------------------------------------------
  //=== Case 4: both lines have non infinite slopes ===
  //----------------------------------------------
  else
  {
    double slopeA = ((double) (p2.y() - p1.y()) ) / (p2.x() - p1.x());
    double slopeB = ((double) (p4.y() - p3.y()) ) / (p4.x() - p3.x());
    double yInterceptA = p1.y() - slopeA*p1.x();
    double yInterceptB = p3.y() - slopeB*p3.x();
    
    //y1 = mx1+b
    //y2 = nx2+c
    //at intersection y1=y2 and x1 = x2 so...
    //mx +b = nx + c
    //x(m-n) = c-b
    //x = (c-b)/(m-n)
    //where m and n are slope and
    //b and c are y-intercepts.
    //x = (c-b)/(m-n)
    double x = (yInterceptB - yInterceptA) / (slopeA - slopeB);
    return DPoint( x, (slopeA * x) + yInterceptA );
  }
}

References DPoint::x(), and DPoint::y().

Referenced by correctImageTilt().

interpolatedPixelValue()

QRgb interpolatedPixelValue	(	double	xp,
		double	yp,
		QImage *	image )

Definition at line 315 of file tilt.cpp.

{
  //do boundary checking to 
  //ensure we don't read beyond image boundaries
  if(xp < 0 || xp >= image->width() ||
     yp < 0 || yp >= image->height() )
    return qRgb( 0, 0, 0 );
 
  //get four pixel colors, 
  int x = (int)xp;
  int y = (int)yp;
  
  uchar* scanLine1 = image->scanLine( y );
 
  uchar* scanLine2;
  if( y < image->height() - 1 )
    scanLine2 = image->scanLine( y+1 );
  else
    scanLine2 = scanLine1;
  
  QRgb p1,p2,p3,p4;
  
  p1 = *((QRgb*)scanLine1+x);
  p3 = *((QRgb*)scanLine2+x);
        
  if( x < image->width() - 1)
  {
    p2 = *((QRgb*)scanLine1+x+1);
    p4 = *((QRgb*)scanLine2+x+1);     
  }
  else
  {
    p2 = p1;
    p4 = p3;
  }
  
  //blend four colors
  double alphaY = yp - y;
  double alphaX = xp - x;
  
  p1 = blendColors( p1, p2, alphaX );
  p3 = blendColors( p3, p4, alphaX );
  p1 = blendColors( p1, p3, alphaY );
  return p1;
}

References blendColors(), height, and width.

Referenced by correctImageTilt().