# Makefile.in generated by automake 1.11.1 from Makefile.am.
# src/drmaa/Makefile.  Generated from Makefile.in by configure.

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.



# $Id: Makefile.am,v 1.13 2006/08/28 23:03:26 ciesnik Exp $
# 
#   DRMAA library for Torque/PBS
#   Copyright (C) 2006  Poznan Supercomputing and Networking Center
#                       DSP team <dsp-devel@hedera.man.poznan.pl>
#
#   This library is free software; you can redistribute it and/or
#   modify it under the terms of the GNU Lesser General Public
#   License as published by the Free Software Foundation; either
#   version 2.1 of the License, or (at your option) any later version.
#
#   This library is distributed in the hope that it will be useful,
#   but WITHOUT ANY WARRANTY; without even the implied warranty of
#   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
#   Lesser General Public License for more details.
#
#   You should have received a copy of the GNU Lesser General Public
#   License along with this library; if not, write to the Free Software
#   Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA  02110-1301  USA
#

pkgdatadir = $(datadir)/torque
pkgincludedir = $(includedir)/torque
pkglibdir = $(libdir)/torque
pkglibexecdir = $(libexecdir)/torque
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = e2kv4-rosa-linux-gnu
host_triplet = e2kv4-rosa-linux-gnu
subdir = src/drmaa
DIST_COMMON = README $(srcdir)/Doxyfile.in $(srcdir)/Makefile.am \
	$(srcdir)/Makefile.in AUTHORS COPYING
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
	$(top_srcdir)/buildutils/tcl.m4 \
	$(top_srcdir)/buildutils/ac_create_generic_config.m4 \
	$(top_srcdir)/buildutils/acx_pthread.m4 \
	$(top_srcdir)/buildutils/ax_prog_dot.m4 \
	$(top_srcdir)/buildutils/ac_c_bigendian_cross.m4 \
	$(top_srcdir)/buildutils/t_add_rpath.m4 \
	$(top_srcdir)/buildutils/tac_tcltk.m4 \
	$(top_srcdir)/buildutils/ax_cflags_gcc_option.m4 \
	$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/src/include/pbs_config.h
CONFIG_CLEAN_FILES = Doxyfile
CONFIG_CLEAN_VPATH_FILES =
AM_V_GEN = $(am__v_GEN_$(V))
am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
am__v_GEN_0 = @echo "  GEN   " $@;
AM_V_at = $(am__v_at_$(V))
am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
am__v_at_0 = @
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
	html-recursive info-recursive install-data-recursive \
	install-dvi-recursive install-exec-recursive \
	install-html-recursive install-info-recursive \
	install-pdf-recursive install-ps-recursive install-recursive \
	installcheck-recursive installdirs-recursive pdf-recursive \
	ps-recursive uninstall-recursive
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
  distclean-recursive maintainer-clean-recursive
AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
	distdir
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
am__relativize = \
  dir0=`pwd`; \
  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
  sed_rest='s,^[^/]*/*,,'; \
  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
  sed_butlast='s,/*[^/]*$$,,'; \
  while test -n "$$dir1"; do \
    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
    if test "$$first" != "."; then \
      if test "$$first" = ".."; then \
        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
      else \
        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
        if test "$$first2" = "$$first"; then \
          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
        else \
          dir2="../$$dir2"; \
        fi; \
        dir0="$$dir0"/"$$first"; \
      fi; \
    fi; \
    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
  done; \
  reldir="$$dir2"
ACLOCAL = ${SHELL} /builddir/build/BUILD/torque-6.1.2/buildutils/missing --run aclocal-1.11
ALPS_LIBS = 
AMTAR = ${SHELL} /builddir/build/BUILD/torque-6.1.2/buildutils/missing --run tar
AM_DEFAULT_VERBOSITY = 1
AR = ar
AUTOCONF = ${SHELL} /builddir/build/BUILD/torque-6.1.2/buildutils/missing --run autoconf
AUTOHEADER = ${SHELL} /builddir/build/BUILD/torque-6.1.2/buildutils/missing --run autoheader
AUTOMAKE = ${SHELL} /builddir/build/BUILD/torque-6.1.2/buildutils/missing --run automake-1.11
AWK = gawk
BLCR_BINDIR = 
BLCR_CPPFLAGS = 
BLCR_LDFLAGS = 
CC = g++
CCDEPMODE = depmode=none
CCLD = g++
CFLAGS = -Wno-error -O3 -g -march=elbrus-v4 -D_LARGEFILE64_SOURCE -I/usr/include -fstack-protector -Wformat -Wformat-security -DFORTIFY_SOURCE=2
CHECK_CFLAGS = 
CHECK_LIBS = 
CPP = gcc -E
CPPFLAGS = -DUSE_INTERP_RESULT -DUSE_INTERP_ERRORLINE -DHAVE_STDBOOL_H -fpermissive -I/usr/include
CXX = g++
CXXCPP = g++ -E
CXXDEPMODE = depmode=none
CXXFLAGS = -Wno-error -O3 -g -march=elbrus-v4 -fstack-protector -Wformat -Wformat-security -DFORTIFY_SOURCE=2
CYGPATH = echo
CYGPATH_W = echo
DEFS = -DHAVE_CONFIG_H
DEPDIR = .deps
DOXYGEN = /usr/bin/doxygen
DSYMUTIL = 
DUMPBIN = 
ECHO_C = 
ECHO_N = -n
ECHO_T = 
EGREP = /bin/grep -E
EXEEXT = 
EXTRA_QSTAT_LIBS = $(EXTRA_QSTAT_LIBS)
FGREP = /bin/grep -F
GENERIC_CONFIG = pbs-config
GREP = /bin/grep
HAVE_CR_RESTART = 
HAVE_DOT = no
HWLOC_CFLAGS = -I/usr/include
HWLOC_LIBS = -L/usr/lib -lhwloc
INSTALL = /usr/bin/install -c
INSTALL_DATA = ${INSTALL} -m 644
INSTALL_PROGRAM = ${INSTALL}
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
LD = /usr/bin/ld
LDFLAGS = -Wno-error -O3 -g -march=elbrus-v4 -Wl,-O2   
LEX = flex
LEXLIB = 
LEX_OUTPUT_ROOT = lex.yy
LIBOBJS = 
LIBS = -lz -lxml2 -lz -llzma -lpthread -licui18n -licuuc -licudata -lm -ldl   -lpthread -lrt -L/usr/lib -lhwloc
LIBTOOL = $(SHELL) $(top_builddir)/libtool
LIBTOOLFLAGS = --tag=CXX
LIBTOOL_DEPS = buildutils/ltmain.sh
LIPO = 
LN_S = ln -s
LTLIBOBJS = 
MAINT = #
MAKE = make
MAKEINFO = ${SHELL} /builddir/build/BUILD/torque-6.1.2/buildutils/missing --run makeinfo
MKDIR_P = /bin/mkdir -p
MODULEFILES_DIR = no
MOMLIBS =  -lutil
MY_TCLTK_INCS = 
MY_TCLTK_LIBS = 
MY_TCL_INCS =  
MY_TCL_LIBS =  -L/usr/lib64 -ltcl8.6 -ldl -lz -lpthread -lm
NM = /usr/bin/nm -B
NMEDIT = 
OBJDUMP = objdump
OBJEXT = o
OTOOL = 
OTOOL64 = 
PACKAGE = torque
PACKAGE_BUGREPORT = torqueusers@supercluster.org
PACKAGE_NAME = torque
PACKAGE_STRING = torque 6.1.2
PACKAGE_TARNAME = torque
PACKAGE_URL = 
PACKAGE_VERSION = 6.1.2
PATH_SEPARATOR = :
PBSPOE = 
PBSPOEO = 
PBS_DEFAULT_FILE = ${PBS_SERVER_HOME}/server_name
PBS_DEFAULT_SERVER = MYSERVERNAME
PBS_ENVIRON = ${PBS_SERVER_HOME}/pbs_environment
PBS_MACH = linux
PBS_SERVER_HOME = /var/spool/torque
PIC = pic
PKG_CONFIG = /usr/bin/pkg-config
PTHREAD_CFLAGS = 
PTHREAD_LIBS =  -lpthread -lrt
RANLIB = ranlib
RCP_ARGS = -rpB
RCP_PATH = /usr/bin/scp
READLINE_LIBS = -lncurses -lreadline
ROFF = groff
RPM_AC_OPTS = --define '_prefix /usr' --without cgroups --with cpuset --without munge --with syslog --with spool --define "torque_server MYSERVERNAME" --with pam --with drmaa
RSH_PATH = ssh
SCHD_CODE = fifo
SCHD_LIBS = 
SCHD_TYPE = cc
SCHD_TYPE_SUBDIR = scheduler.cc
SED = /usr/bin/sed
SENDMAIL_CMD = sendmail
SET_MAKE = 
SHELL = /bin/sh
SPEC_NAME = torque
SPEC_VERSION = 6.1.2
STRIP = strip
TBL = tbl
TCLSH_PROG = /usr/bin/tclsh8.6
TCL_BIN_DIR = /usr/lib64
TCL_DEFS = -DPACKAGE_NAME=\"tcl\" -DPACKAGE_TARNAME=\"tcl\" -DPACKAGE_VERSION=\"8.6\" -DPACKAGE_STRING=\"tcl\ 8.6\" -DPACKAGE_BUGREPORT=\"\" -DPACKAGE_URL=\"\" -DHAVE_STDIO_H=1 -DHAVE_STDLIB_H=1 -DHAVE_STRING_H=1 -DHAVE_INTTYPES_H=1 -DHAVE_STDINT_H=1 -DHAVE_STRINGS_H=1 -DHAVE_SYS_STAT_H=1 -DHAVE_SYS_TYPES_H=1 -DHAVE_UNISTD_H=1 -DHAVE_SYS_TIME_H=1 -DSTDC_HEADERS=1 -DHAVE_SYS_PARAM_H=1 -DUSE_THREAD_ALLOC=1 -D_REENTRANT=1 -D_THREAD_SAFE=1 -DHAVE_PTHREAD_ATTR_SETSTACKSIZE=1 -DHAVE_PTHREAD_ATFORK=1 -DTCL_THREADS=1 -DTCL_CFGVAL_ENCODING=\"iso8859-1\" -DHAVE_ZLIB=1 -DMODULE_SCOPE=extern\ __attribute__\(\(__visibility__\(\"hidden\"\)\)\) -DHAVE_HIDDEN=1 -DTCL_CFG_DO64BIT=1 -DHAVE_CAST_TO_UNION=1 -DTCL_SHLIB_EXT=\".so\" -DNDEBUG=1 -DTCL_CFG_OPTIMIZED=1 -DTCL_TOMMATH=1 -DMP_PREC=4 -D_LARGEFILE64_SOURCE=1 -DTCL_WIDE_INT_IS_LONG=1 -DHAVE_GETCWD=1 -DHAVE_MKSTEMP=1 -DHAVE_OPENDIR=1 -DHAVE_STRTOL=1 -DHAVE_WAITPID=1 -DHAVE_GETNAMEINFO=1 -DHAVE_GETADDRINFO=1 -DHAVE_FREEADDRINFO=1 -DHAVE_GAI_STRERROR=1 -DHAVE_STRUCT_ADDRINFO=1 -DHAVE_STRUCT_IN6_ADDR=1 -DHAVE_STRUCT_SOCKADDR_IN6=1 -DHAVE_STRUCT_SOCKADDR_STORAGE=1 -DHAVE_GETPWUID_R_5=1 -DHAVE_GETPWUID_R=1 -DHAVE_GETPWNAM_R_5=1 -DHAVE_GETPWNAM_R=1 -DHAVE_GETGRGID_R_5=1 -DHAVE_GETGRGID_R=1 -DHAVE_GETGRNAM_R_5=1 -DHAVE_GETGRNAM_R=1 -DHAVE_DECL_GETHOSTBYNAME_R=1 -DHAVE_GETHOSTBYNAME_R_6=1 -DHAVE_GETHOSTBYNAME_R=1 -DHAVE_DECL_GETHOSTBYADDR_R=1 -DHAVE_GETHOSTBYADDR_R_8=1 -DHAVE_GETHOSTBYADDR_R=1 -DHAVE_TERMIOS_H=1 -DHAVE_SYS_IOCTL_H=1 -DHAVE_SYS_TIME_H=1 -DTIME_WITH_SYS_TIME=1 -DHAVE_GMTIME_R=1 -DHAVE_LOCALTIME_R=1 -DHAVE_MKTIME=1 -DHAVE_TM_GMTOFF=1 -DHAVE_TIMEZONE_VAR=1 -DHAVE_STRUCT_STAT_ST_BLOCKS=1 -DHAVE_STRUCT_STAT_ST_BLKSIZE=1 -DHAVE_BLKCNT_T=1 -DHAVE_INTPTR_T=1 -DHAVE_UINTPTR_T=1 -DNO_UNION_WAIT=1 -DHAVE_SIGNED_CHAR=1 -DHAVE_LANGINFO=1 -DHAVE_MKSTEMPS=1 -DHAVE_FTS=1 -DHAVE_SYS_IOCTL_H=1 -DTCL_UNLOAD_DLLS=1
TCL_EXTRA_CFLAGS = -Wno-error -O3 -g -march=elbrus-v4 -pipe -m64 
TCL_INCLUDES = 
TCL_LD_FLAGS = -Wno-error -O3 -g -march=elbrus-v4 -Wl,-O2  -Wl,--no-undefined   -Wl,--export-dynamic 
TCL_LIBS = -ldl -lz  -lpthread -lm
TCL_LIB_FILE = libtcl8.6.so
TCL_LIB_FLAG = -ltcl8.6
TCL_LIB_SPEC = -L/usr/lib64 -ltcl8.6
TCL_SHLIB_LD_LIBS = ${LIBS}
TCL_SRC_DIR = /usr/include/tcl8.6.11
TCL_STUB_LIB_FILE = libtclstub8.6.a
TCL_STUB_LIB_FLAG = -ltclstub8.6
TCL_STUB_LIB_SPEC = -L/usr/lib64 -ltclstub8.6
TCL_VERSION = 8.6
TK_BIN_DIR = none
TK_INCLUDES = 
TK_LIBS = 
TK_LIB_FILE = 
TK_LIB_FLAG = 
TK_LIB_SPEC = 
TK_SRC_DIR = 
TK_STUB_LIB_FILE = 
TK_STUB_LIB_FLAG = 
TK_STUB_LIB_SPEC = 
TK_VERSION = 
TK_XINCLUDES = 
VERSION = 6.1.2
WISH_PROG = 
YACC = bison -y
YFLAGS = 
abs_builddir = /builddir/build/BUILD/torque-6.1.2/src/drmaa
abs_srcdir = /builddir/build/BUILD/torque-6.1.2/src/drmaa
abs_top_builddir = /builddir/build/BUILD/torque-6.1.2
abs_top_srcdir = /builddir/build/BUILD/torque-6.1.2
ac_ct_CC = gcc
ac_ct_CXX = 
ac_ct_DUMPBIN = 
acx_pthread_config = 
am__include = include
am__leading_dot = .
am__quote = 
am__tar = ${AMTAR} chof - "$$tardir"
am__untar = ${AMTAR} xf -
bindir = /usr/bin
build = e2kv4-rosa-linux-gnu
build_alias = e2kv4-rosa-linux-gnu
build_clients = yes
build_cpu = e2kv4
build_drmaa = yes
build_drmaa_docs = yes
build_gui = no
build_mom = yes
build_os = linux-gnu
build_pbs_rcp = no
build_server = yes
build_vendor = rosa
builddir = .
datadir = /usr/share
datarootdir = ${prefix}/share
docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
drmaadocdir = /usr/share/doc/torque-drmaa
dvidir = ${docdir}
exec_prefix = /usr
have_loadlibfile = no
host = e2kv4-rosa-linux-gnu
host_alias = 
host_cpu = e2kv4
host_os = linux-gnu
host_vendor = rosa
htmldir = ${docdir}
includedir = /usr/include/torque
infodir = /usr/share/info
install_sh = ${SHELL} /builddir/build/BUILD/torque-6.1.2/buildutils/install-sh
libdir = /usr/lib64
libexecdir = /usr/libexec
localedir = ${datarootdir}/locale
localstatedir = /var
lt_ECHO = echo
mandir = /usr/share/man
mkdir_p = /bin/mkdir -p
oldincludedir = /usr/include
pammoddir = /usr/lib64/security
pdfdir = ${docdir}
prefix = /usr
program_prefix = 
program_suffix = 
program_transform_name = s&^&&
psdir = ${docdir}
sbindir = /usr/sbin
sharedstatedir = /var/lib
srcdir = .
sysconfdir = /etc
target_alias = e2kv4-rosa-linux-gnu
tclx_LIB_FILE = 
tclx_LIB_SPEC = 
tclx_SRC_DIR = 
tclx_STUB_LIB_FILE = 
tclx_STUB_LIB_PATH = 
tclx_STUB_LIB_SPEC = 
tclx_VERSION = 
tkx_LIB_FILE = 
tkx_LIB_SPEC = 
tkx_SRC_DIR = 
tkx_STUB_LIB_FILE = 
tkx_STUB_LIB_PATH = 
tkx_STUB_LIB_SPEC = 
tkx_VERSION = 
top_build_prefix = ../../
top_builddir = ../..
top_srcdir = ../..
use_tcl = 1
use_tk = 0
xauth_path = /usr/bin/xauth
SUBDIRS = src
pkgdocdir = /usr/share/doc/torque-drmaa
DISTCLEANFILES = doc-timestamp doc/html/* doc/latex/* doc/man/man*/* 
all: all-recursive

.SUFFIXES:
$(srcdir)/Makefile.in: # $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/drmaa/Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --foreign src/drmaa/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure: # $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): # $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
Doxyfile: $(top_builddir)/config.status $(srcdir)/Doxyfile.in
	cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
	@fail= failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

$(RECURSIVE_CLEAN_TARGETS):
	@fail= failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	rev=''; for subdir in $$list; do \
	  if test "$$subdir" = "."; then :; else \
	    rev="$$subdir $$rev"; \
	  fi; \
	done; \
	rev="$$rev ."; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done
ctags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
	done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	mkid -fID $$unique
tags: TAGS

TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	set x; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	shift; \
	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  if test $$# -gt 0; then \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      "$$@" $$unique; \
	  else \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      $$unique; \
	  fi; \
	fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	test -z "$(CTAGS_ARGS)$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && $(am__cd) $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) "$$here"

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags

distdir: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test -d "$(distdir)/$$subdir" \
	    || $(MKDIR_P) "$(distdir)/$$subdir" \
	    || exit 1; \
	  fi; \
	done
	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
	    $(am__relativize); \
	    new_distdir=$$reldir; \
	    dir1=$$subdir; dir2="$(top_distdir)"; \
	    $(am__relativize); \
	    new_top_distdir=$$reldir; \
	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
	    ($(am__cd) $$subdir && \
	      $(MAKE) $(AM_MAKEFLAGS) \
	        top_distdir="$$new_top_distdir" \
	        distdir="$$new_distdir" \
		am__remove_distdir=: \
		am__skip_length_check=: \
		am__skip_mode_fix=: \
	        distdir) \
	      || exit 1; \
	  fi; \
	done
check-am: all-am
check: check-recursive
all-am: Makefile
installdirs: installdirs-recursive
installdirs-am:
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
#install-data-local:
clean: clean-recursive

clean-am: clean-generic clean-libtool mostlyclean-am

distclean: distclean-recursive
	-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-tags

dvi: dvi-recursive

dvi-am:

html: html-recursive

html-am:

info: info-recursive

info-am:

install-data-am: install-data-local

install-dvi: install-dvi-recursive

install-dvi-am:

install-exec-am:

install-html: install-html-recursive

install-html-am:

install-info: install-info-recursive

install-info-am:

install-man:

install-pdf: install-pdf-recursive

install-pdf-am:

install-ps: install-ps-recursive

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic \
	maintainer-clean-local

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-recursive

pdf-am:

ps: ps-recursive

ps-am:

uninstall-am:
	@$(NORMAL_INSTALL)
	$(MAKE) $(AM_MAKEFLAGS) uninstall-hook
.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
	install-am install-strip tags-recursive uninstall-am

.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
	all all-am check check-am clean clean-generic clean-libtool \
	ctags ctags-recursive distclean distclean-generic \
	distclean-libtool distclean-tags distdir dvi dvi-am html \
	html-am info info-am install install-am install-data \
	install-data-am install-data-local install-dvi install-dvi-am \
	install-exec install-exec-am install-html install-html-am \
	install-info install-info-am install-man install-pdf \
	install-pdf-am install-ps install-ps-am install-strip \
	installcheck installcheck-am installdirs installdirs-am \
	maintainer-clean maintainer-clean-generic \
	maintainer-clean-local mostlyclean mostlyclean-generic \
	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
	uninstall uninstall-am uninstall-hook


#pdf_doc = drmaa.pdf
install-data-local: install-doc
#pkgdoc_DATA = $(pdf_doc)

uninstall-hook:
	rm -rf $(DESTDIR)$(pkgdocdir)

#install-data-hook:
#	for i in $(plaintext_doc); do gzip --force --best $(pkgdocdir)/$$i; done

install-doc: doc
	( cd doc; find -type f -exec $(INSTALL_DATA) -D '{}' '$(DESTDIR)$(pkgdocdir)/{}' \; )

doc: doc-timestamp
#drmaa.pdf: doc-timestamp
doc-timestamp:
	@if [ ! -f $@ \
		-o `find $(srcdir)/src \( -name '*.c' -o -name '*.h' \) -a -newer $@ \
			| wc -l` -gt 0 \
		-o Doxyfile -nt $@ \
		]; then \
			rm -rf doc; \
			echo "$(DOXYGEN)"; \
			$(DOXYGEN) -u && touch $@ || exit 1; \
			if [ -d doc/latex ]; then \
				(cd doc/latex && $(MAKE) $(AM_MAKEFLAGS) ) || exit 1; \
				(cd doc/latex && $(MAKE) $(AM_MAKEFLAGS) clean ); \
			fi \
	fi

maintainer-clean-local:
	-rm -rf doc

doc doc-timestamp: FORCE
FORCE:

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT:
