ost::TCPSession Class Reference

The TCP session is used to primarily to represent a client connection that can be managed on a seperate thread. More...

#include <socket.h>

Inheritance diagram for ost::TCPSession:

Public Member Functions
	TCPSession (const IPV4Host &host, tpport_t port, size_t size=536, int pri=0, size_t stack=0)
	Create a TCP socket that will be connected to a remote TCP server and that will execute under it's own thread. More...
	TCPSession (const IPV6Host &host, tpport_t port, size_t size=536, int pri=0, size_t stack=0)
	TCPSession (TCPSocket &server, int pri=0, size_t stack=0)
	Create a TCP socket from a bound TCP server by accepting a pending connection from that server and execute a thread for the accepted connection. More...
	TCPSession (TCPV6Socket &server, int pri=0, size_t stack=0)
virtual	~TCPSession ()
	Make sure destruction happens through a virtual... More...
Public Member Functions inherited from ost::Thread
	Thread (bool isMain)
	This is actually a special constructor that is used to create a thread "object" for the current execution context when that context is not created via an instance of a derived Thread object itself. More...
	Thread (int pri=0, size_t stack=0)
	When a thread object is contructed, a new thread of execution context is created. More...
	Thread (const Thread &th)
	A thread of execution can also be specified by cloning an existing thread. More...
virtual	~Thread ()
	The thread destructor should clear up any resources that have been allocated by the thread. More...
int	start (Semaphore *start=0)
	When a new thread is created, it does not begin immediate execution. More...
int	detach (Semaphore *start=0)
	Start a new thread as "detached". More...
Thread *	getParent (void)
	Gets the pointer to the Thread class which created the current thread object. More...
void	suspend (void)
	Suspends execution of the selected thread. More...
void	resume (void)
	Resumes execution of the selected thread. More...
Cancel	getCancel (void)
	Used to retrieve the cancellation mode in effect for the selected thread. More...
bool	isRunning (void) const
	Verifies if the thread is still running or has already been terminated but not yet deleted. More...
bool	isDetached (void) const
	Check if this thread is detached. More...
void	join (void)
	Blocking call which unlocks when thread terminates. More...
bool	isThread (void) const
	Tests to see if the current execution context is the same as the specified thread object. More...
cctid_t	getId (void) const
	Get system thread numeric identifier. More...
const char *	getName (void) const
	Get the name string for this thread, to use in debug messages. More...
Public Member Functions inherited from ost::TCPStream
	TCPStream (Family family=IPV4, bool throwflag=true, timeout_t to=0)
	The constructor required for building other classes or to start an unconnected TCPStream for connect. More...
void	disconnect (void)
	Disconnect the current session and prepare for a new one. More...
int	getSegmentSize (void)
	Get protocol segment size. More...
	TCPStream (TCPSocket &server, bool throwflag=true, timeout_t timeout=0)
	Create a TCP stream by accepting a connection from a bound TCP socket acting as a server. More...
	TCPStream (TCPV6Socket &server, bool throwflag=true, timeout_t timeout=0)
void	connect (TCPSocket &server)
	Accept a connection from a TCP Server. More...
void	connect (TCPV6Socket &server)
	TCPStream (const IPV4Host &host, tpport_t port, unsigned mss=536, bool throwflag=true, timeout_t timeout=0)
	Create a TCP stream by connecting to a TCP socket (on a remote machine). More...
	TCPStream (const IPV6Host &host, tpport_t port, unsigned mss=536, bool throwflag=true, timeout_t timeout=0)
	TCPStream (const char *name, Family family=IPV4, unsigned mss=536, bool throwflag=false, timeout_t timer=0)
	Construct a named TCP Socket connected to a remote machine. More...
void	setTimeout (timeout_t timer)
	Set the I/O operation timeout for socket I/O operations. More...
	TCPStream (const TCPStream &source)
	A copy constructor creates a new stream buffer. More...
virtual	~TCPStream ()
	Flush and empty all buffers, and then remove the allocated buffers. More...
int	sync (void)
	Flushes the stream input and output buffers, writes pending output. More...
size_t	printf (const char *format,...)
	Print content into a socket. More...
bool	isPending (Pending pend, timeout_t timeout=TIMEOUT_INF)
	Get the status of pending stream data. More...
ssize_t	peek (void *buf, size_t len)
	Examine contents of next waiting packet. More...
size_t	getBufferSize (void) const
	Return the size of the current stream buffering used. More...
Public Member Functions inherited from ost::Socket
virtual	~Socket ()
	The socket base class may be "thrown" as a result of an error, and the "catcher" may then choose to destroy the object. More...
Socket &	operator= (const Socket &from)
	Sockets may also be duplicated by the assignment operator. More...
virtual IPV4Host	getIPV4Sender (tpport_t *port=NULL) const
	May be used to examine the origin of data waiting in the socket receive queue. More...
IPV4Host	getSender (tpport_t *port=NULL) const
virtual IPV6Host	getIPV6Sender (tpport_t *port=NULL) const
IPV4Host	getIPV4Peer (tpport_t *port=NULL) const
	Get the host address and port of the socket this socket is connected to. More...
IPV4Host	getPeer (tpport_t *port=NULL) const
IPV6Host	getIPV6Peer (tpport_t *port=NULL) const
IPV4Host	getIPV4Local (tpport_t *port=NULL) const
	Get the local address and port number this socket is currently bound to. More...
IPV4Host	getLocal (tpport_t *port=NULL) const
IPV6Host	getIPV6Local (tpport_t *port=NULL) const
IPV4Host	getIPV4NAT (tpport_t *port=NULL) const
	Perform NAT table lookup for this socket. More...
IPV4Host	getNAT (tpport_t *port) const
IPV6Host	getIPV6NAT (tpport_t *port=NULL) const
void	setCompletion (bool immediate)
	Used to specify blocking mode for the socket. More...
Error	setLinger (bool linger)
	Enable lingering sockets on close. More...
Error	setKeepAlive (bool enable)
	Set the keep-alive status of this socket and if keep-alive messages will be sent. More...
Error	setTypeOfService (Tos service)
	Set packet scheduling on platforms which support ip quality of service conventions. More...
bool	isConnected (void) const
	Can test to see if this socket is "connected", and hence whether a "catch" can safely call getPeer(). More...
bool	isActive (void) const
	Test to see if the socket is at least operating or if it is mearly initialized. More...
bool	operator! () const
	Operator based testing to see if a socket is currently active. More...
bool	isBroadcast (void) const
	Return if broadcast has been enabled for the specified socket. More...
bool	isRouted (void) const
	Return if socket routing is enabled. More...
Error	getErrorNumber (void) const
	Often used by a "catch" to fetch the last error of a thrown socket. More...
const char *	getErrorString (void) const
	Often used by a "catch" to fetch the user set error string of a thrown socket, but only if EXTENDED error codes are used. More...
long	getSystemError (void) const
const char *	getSystemErrorString (void) const

Protected Member Functions
int	waitConnection (timeout_t timeout=TIMEOUT_INF)
	Normally called during the thread Initial() method by default, this will wait for the socket connection to complete when connecting to a remote socket. More...
void	initial (void)
	The initial method is used to esablish a connection when delayed completion is used. More...
Protected Member Functions inherited from ost::Thread
void	setName (const char *text)
	Set the name of the current thread. More...
virtual void	run (void)=0
	All threads execute by deriving the Run method of Thread. More...
virtual void	final (void)
	A thread that is self terminating, either by invoking exit() or leaving it's run(), will have this method called. More...
virtual void *	getExtended (void)
	Since getParent() and getThread() only refer to an object of the Thread "base" type, this virtual method can be replaced in a derived class with something that returns data specific to the derived class that can still be accessed through the pointer returned by getParent() and getThread(). More...
virtual void	notify (Thread *)
	When a thread terminates, it now sends a notification message to the parent thread which created it. More...
void	exit (void)
	Used to properly exit from a Thread derived run() or initial() method. More...
void	sync (void)
	Used to wait for a join or cancel, in place of explicit exit. More...
bool	testCancel (void)
	test a cancellation point for deferred thread cancellation. More...
void	setCancel (Cancel mode)
	Sets thread cancellation mode. More...
void	setSuspend (Suspend mode)
	Sets the thread's ability to be suspended from execution. More...
void	terminate (void)
	Used by another thread to terminate the current thread. More...
void	clrParent (void)
	clear parent thread relationship. More...
Protected Member Functions inherited from ost::TCPStream
void	allocate (size_t size)
	Used to allocate the buffer space needed for iostream operations. More...
void	endStream (void)
	Used to terminate the buffer space and cleanup the socket connection. More...
int	underflow ()
	This streambuf method is used to load the input buffer through the established tcp socket connection. More...
int	uflow ()
	This streambuf method is used for doing unbuffered reads through the establish tcp socket connection when in interactive mode. More...
int	overflow (int ch)
	This streambuf method is used to write the output buffer through the established tcp connection. More...
void	connect (const IPV4Host &host, tpport_t port, unsigned mss=536)
	Create a TCP stream by connecting to a TCP socket (on a remote machine). More...
void	connect (const IPV6Host &host, tpport_t port, unsigned mss=536)
void	connect (const char *name, unsigned mss=536)
	Connect a TCP stream to a named destination host and port number, using getaddrinfo interface if available. More...
std::iostream *	tcp (void)
	Used in derived classes to refer to the current object via it's iostream. More...
Protected Member Functions inherited from ost::Socket
Error	error (Error error, const char *err=NULL, long systemError=0) const
	This service is used to throw all socket errors which usually occur during the socket constructor. More...
void	error (const char *err) const
	This service is used to throw application defined socket errors where the application specific error code is a string. More...
void	setError (bool enable)
	This service is used to turn the error handler on or off for "throwing" exceptions by manipulating the thrown flag. More...
void	endSocket (void)
	Used as the default destructor for ending a socket. More...
Error	connectError (void)
	Used as a common handler for connection failure processing. More...
Error	sendLimit (int limit=2048)
	Set the send limit. More...
Error	receiveLimit (int limit=1)
	Set thr receive limit. More...
Error	sendTimeout (timeout_t timer)
	Set the send timeout for sending raw network data. More...
Error	receiveTimeout (timeout_t timer)
	Receive timeout for receiving raw network data. More...
Error	sendBuffer (unsigned size)
	Set the protocol stack network kernel send buffer size associated with the socket. More...
Error	receiveBuffer (unsigned size)
	Set the protocol stack network kernel receive buffer size associated with the socket. More...
Error	bufferSize (unsigned size)
	Set the total protocol stack network kernel buffer size for both send and receive together. More...
Error	setBroadcast (bool enable)
	Set the subnet broadcast flag for the socket. More...
Error	setMulticastByFamily (bool enable, Family family=IPV4)
	Setting multicast binds the multicast interface used for the socket to the interface the socket itself has been implicitly bound to. More...
Error	setLoopbackByFamily (bool enable, Family family=IPV4)
	Set the multicast loopback flag for the socket. More...
Error	setTimeToLiveByFamily (unsigned char ttl, Family fam=IPV4)
	Set the multicast time to live for a multicast socket. More...
Error	join (const IPV4Multicast &ia)
	Join a multicast group. More...
Error	join (const IPV6Multicast &ia)
Error	drop (const IPV4Multicast &ia)
	Drop membership from a multicast group. More...
Error	drop (const IPV6Multicast &ia)
Error	setRouting (bool enable)
	Set the socket routing to indicate if outgoing messages should bypass normal routing (set false). More...
Error	setNoDelay (bool enable)
	Enable/disable delaying packets (Nagle algorithm) More...
	Socket (int domain, int type, int protocol=0)
	An unconnected socket may be created directly on the local machine. More...
	Socket (SOCKET fd)
	A socket object may be created from a file descriptor when that descriptor was created either through a socket() or accept() call. More...
	Socket ()
	Create an inactive socket object for base constructors. More...
	Socket (const Socket &source)
	A socket can also be constructed from an already existing Socket object. More...
ssize_t	readLine (char *buf, size_t len, timeout_t timeout=0)
	Process a logical input line from a socket descriptor directly. More...
virtual ssize_t	readData (void *buf, size_t len, char separator=0, timeout_t t=0)
	Read in a block of len bytes with specific separator. More...
virtual ssize_t	writeData (const void *buf, size_t len, timeout_t t=0)
	Write a block of len bytes to socket. More...

Additional Inherited Members
Public Types inherited from ost::Thread
enum	Throw { throwNothing , throwObject , throwException }
	How to raise error. More...
enum	Cancel {   cancelInitial =0 , cancelDeferred =1 , cancelImmediate , cancelDisabled ,   cancelManual , cancelDefault =cancelDeferred }
	How work cancellation. More...
enum	Suspend { suspendEnable , suspendDisable }
	How work suspend. More...
typedef enum ost::Thread::Throw	Throw
	How to raise error. More...
typedef enum ost::Thread::Cancel	Cancel
	How work cancellation. More...
typedef enum ost::Thread::Suspend	Suspend
	How work suspend. More...
Public Types inherited from ost::Socket
enum	Family { IPV6 = AF_INET6 , IPV4 = AF_INET }
enum	Error {   errSuccess = 0 , errCreateFailed , errCopyFailed , errInput ,   errInputInterrupt , errResourceFailure , errOutput , errOutputInterrupt ,   errNotConnected , errConnectRefused , errConnectRejected , errConnectTimeout ,   errConnectFailed , errConnectInvalid , errConnectBusy , errConnectNoRoute ,   errBindingFailed , errBroadcastDenied , errRoutingDenied , errKeepaliveDenied ,   errServiceDenied , errServiceUnavailable , errMulticastDisabled , errTimeout ,   errNoDelay , errExtended , errLookupFail , errSearchErr ,   errInvalidValue }
enum	Tos {   tosLowDelay = 0 , tosThroughput , tosReliability , tosMinCost ,   tosInvalid }
enum	Pending { pendingInput , pendingOutput , pendingError }
typedef enum Family	Family
typedef enum Error	Error
typedef enum Tos	Tos
typedef enum Pending	Pending
Static Public Member Functions inherited from ost::Thread
static Thread *	get (void)
static void	setStack (size_t size=0)
	Set base stack limit before manual stack sizes have effect. More...
static void	sleep (timeout_t msec)
	A thread-safe sleep call. More...
static void	yield (void)
	Yields the current thread's CPU time slice to allow another thread to begin immediate execution. More...
static Throw	getException (void)
	Get exception mode of the current thread. More...
static void	setException (Throw mode)
	Set exception mode of the current thread. More...
static Cancel	enterCancel (void)
	This is used to help build wrapper functions in libraries around system calls that should behave as cancellation points but don't. More...
static void	exitCancel (Cancel cancel)
	This is used to restore a cancel block. More...
Static Public Member Functions inherited from ost::Socket
static bool	check (Family fam)
	See if a specific protocol family is available in the current runtime environment. More...
Protected Types inherited from ost::Socket
enum	State {   INITIAL , AVAILABLE , BOUND , CONNECTED ,   CONNECTING , STREAM }
typedef enum State	State
Protected Attributes inherited from ost::TCPStream
timeout_t	timeout
size_t	bufsize
Family	family
char *	gbuf
char *	pbuf
Protected Attributes inherited from ost::Socket
struct {
bool   thrown: 1
bool   broadcast: 1
bool   route: 1
bool   keepalive: 1
bool   loopback: 1
bool   multicast: 1
bool   completion: 1
bool   linger: 1
unsigned   ttl: 8
}	flags
SOCKET volatile	so
	the actual socket descriptor, in Windows, unlike posix it cannot be used as an file descriptor that way madness lies – jfc More...
State volatile	state
Static Protected Attributes inherited from ost::Socket
static Mutex	mutex

Detailed Description

The TCP session is used to primarily to represent a client connection that can be managed on a seperate thread.

The TCP session also supports a non-blocking connection scheme which prevents blocking during the constructor and moving the process of completing a connection into the thread that executes for the session.

Author

David Sugar dyfet.nosp@m.@ost.nosp@m.el.co.nosp@m.m

Threaded streamable socket with non-blocking constructor.

Constructor & Destructor Documentation

TCPSession() [1/4]

ost::TCPSession::TCPSession	(	const IPV4Host &	host,
		tpport_t	port,
		size_t	size = 536,
		int	pri = 0,
		size_t	stack = 0
	)

Create a TCP socket that will be connected to a remote TCP server and that will execute under it's own thread.

Parameters

host	internet address of remote TCP server.
port	number of remote server.
size	of streaming buffer.
pri	execution priority relative to parent.
stack	allocation needed on some platforms.

TCPSession() [2/4]

ost::TCPSession::TCPSession	(	const IPV6Host &	host,
		tpport_t	port,
		size_t	size = 536,
		int	pri = 0,
		size_t	stack = 0
	)

TCPSession() [3/4]

ost::TCPSession::TCPSession	(	TCPSocket &	server,
		int	pri = 0,
		size_t	stack = 0
	)

Create a TCP socket from a bound TCP server by accepting a pending connection from that server and execute a thread for the accepted connection.

Parameters

server	tcp socket to accept a connection from.
pri	execution priority relative to parent.
stack	allocation needed on some platforms.

TCPSession() [4/4]

ost::TCPSession::TCPSession	(	TCPV6Socket &	server,
		int	pri = 0,
		size_t	stack = 0
	)

~TCPSession()

virtual ost::TCPSession::~TCPSession ( )

virtual

Make sure destruction happens through a virtual...

Member Function Documentation

initial()

void ost::TCPSession::initial ( void  )

protectedvirtual

The initial method is used to esablish a connection when delayed completion is used.

This assures the constructor terminates without having to wait for a connection request to complete.

Reimplemented from ost::Thread.

waitConnection()

int ost::TCPSession::waitConnection ( timeout_t  timeout = TIMEOUT_INF )

protected

Normally called during the thread Initial() method by default, this will wait for the socket connection to complete when connecting to a remote socket.

One might wish to use setCompletion() to change the socket back to blocking I/O calls after the connection completes. To implement the session one must create a derived class which implements run().

Returns

0 if successful, -1 if timed out.

Parameters

timeout

to wait for completion in milliseconds.

---

The documentation for this class was generated from the following file:

• socket.h